Home / Instructional Video

Instructional videos

Aero

How To Change Vacuum Pump Oil in Aero Vacuum Machines

Proper maintenance is essential to ensure your Henkelman Aero continues “extracting more value” for your business. This practial video guide […]

Proper maintenance is essential to ensure your Henkelman Aero continues “extracting more value” for your business. This practial video guide demonstrates the correct oil change procedure for our table-top vacuum packaging machines. Regular oil changes are vital for preventing pump wear and removing moisture, keeping your vacuum results consistent and reliable. We cover the full process, from running the initial pump cleaning cycle to refilling with fresh oil from a genuine Henkelman Service Kit to maintain peak performance and machine longevity.

Key Takeaways:

Preparation: Running the pump cleaning cycle to warm the oil and remove moisture before draining.
Accessing the Pump: Safely removing the bottom cover and disconnecting the protective earth wire.
Draining & Inspection: Efficiently draining old oil and inspecting the sight glass and fibre washer for wear.
Refilling: Adding fresh oil from the Henkelman Service Kit to the optimal level (1/2 to 3/4 on the sight glass).
Testing: Reassembling the unit and performing a test cycle to verify vacuum performance.

Jumbo 42

How To Change Vacuum Pump Oil in Jumbo 42 Machines

Routine oil changes are essential for maintaining the performance and reliability of your Henkelman Jumbo 42 vacuum packaging machine. In […]

Routine oil changes are essential for maintaining the performance and reliability of your Henkelman Jumbo 42 vacuum packaging machine. In this video, we demonstrate the correct procedure for changing the oil in the vacuum pump, including running the conditioning cycle, draining used oil, cleaning the oil sight glass, and refilling with fresh vacuum pump oil. Performing regular vacuum pump maintenance helps maintain strong vacuum pressure, protects internal pump components, and extends the operational life of your packaging equipment.

Key Takeaways:

Run the Conditioning Cycle: Warm the oil inside the vacuum pump to improve drainage and remove moisture buildup.
Drain the Used Oil: Safely release the old oil from the pump through the drain point.
Clean the Oil Sight Glass: Ensure the oil viewing window is clear to monitor the oil level accurately.
Refill with Fresh Vacuum Pump Oil: Add the recommended oil until the correct level is visible.
Confirm Proper Oil Level: Verify the sight glass level before returning the machine to service.

Boxer 52

How To Change Vacuum Pump Oil in Boxer 52 Machines

Regular maintenance is essential to keep your Henkelman Boxer 52 vacuum packaging machine performing at its best. This video provides […]

Regular maintenance is essential to keep your Henkelman Boxer 52 vacuum packaging machine performing at its best. This video provides a clear, practical guide to changing the vacuum pump oil, an important task that helps maintain consistent vacuum performance, protect internal components, and extend the life of your machine. Whether you are carrying out routine servicing or addressing reduced efficiency, this guide ensures the process is completed safely and correctly.

Key Takeaways:

Access the vacuum pump safely by opening the machine and removing the appropriate panel
Fully drain the used oil to prevent contamination and maintain performance
Refill with the recommended vacuum pump oil to the correct level
Inspect key components for signs of wear during the process
Reassemble and test the unit to ensure optimal operation

All Machines

How to Change the Exhaust Filter on Your Henkelman Vacuum Sealer

Maintaining the performance of your Henkelman vacuum sealer is essential for ensuring the longevity of your machine and the quality […]

Maintaining the performance of your Henkelman vacuum sealer is essential for ensuring the longevity of your machine and the quality of your packaging. Over time, the exhaust filter in your vacuum pump can become saturated, leading to reduced efficiency and potential oil misting.

In this practical video guide, we demonstrate how to safely access the vacuum pump, remove the old filter, and install a genuine Busch exhaust filter. Following these simple maintenance steps will keep your machine running at peak performance and ensure a clean, professional working environment.

Key Takeaways:

Safety First: Always power off and unplug your machine before performing any internal maintenance.
Easy Access: Remove the rear panel and protective pump cover to locate the exhaust filter.
Simple Removal: Loosen the butterfly clip and use the pull-tab to extract the old filter.
Precision Installation: Check the O-ring and align the directional arrow on your new filter for a perfect seal.
Performance Testing: Verify a successful installation by listening for a smooth pump operation and checking for the absence of oil mist.

All Machines

How to Run the Pump Cleaning Cycle on Your Henkelman Vacuum Sealer

Regular maintenance is the key to a high-performing vacuum sealer, and the pump cleaning cycle is one of the most […]

Regular maintenance is the key to a high-performing vacuum sealer, and the pump cleaning cycle is one of the most important routines for your Henkelman machine. This cycle helps maintain the quality of the pump oil by removing moisture and contaminants that accumulate during daily use.

In this video, we walk you through the simple process of initiating the cleaning cycle. By running this 15-minute program regularly, you introduce heat into the vacuum pump, ensuring the oil remains effective and the machine continues to pull a deep vacuum every time.

Key Takeaways:

Simple Initiation: Easily start the process by pressing the dedicated ‘Cleaning’ button; look for the “C” on the display.
Automated Maintenance: The machine runs a continuous 15-minute cycle, automatically venting the chamber to flush out impurities.
Oil Longevity: Introducing heat is critical for tabletop models to prevent oil degradation.
Flexible Control: You can stop the cycle at any time if you need to resume packaging, simply by pressing the ‘Stop’ button.
Cycle Tracking: Understand that only full 15-minute cycles are logged in the machine’s service history for maintenance tracking.

All Machines

How to Replace the Silicone Lid Seal on Your Henkelman Vacuum Sealer

A perfect vacuum depends on a perfect seal. Over time, the silicone lid seal on your Henkelman machine can become […]

A perfect vacuum depends on a perfect seal. Over time, the silicone lid seal on your Henkelman machine can become worn, flattened, or contaminated with oils, which may lead to vacuum leaks. Replacing this seal is a quick and effective way to maintain the integrity of your packaging process.

In this video guide, we show you how to correctly remove your old seal and install a fresh one from a genuine Henkelman service kit. We also cover the “Rule of 9” to ensure your seal is oriented correctly, preventing common installation errors that can halt production.

Key Takeaways:

The Right Parts: Always use a genuine Henkelman service kit to ensure the silicone profile matches your specific machine model.
Cleaning the Groove: Always clean the lid groove of grime and oils before installing the new seal to prevent slippage.
Orientation Matters: When looking at the side profile of the seal, it should look like the numeral “9.” Ensure the “leg” of the seal faces outwards from the lid in all directions.
Precision Fitting: Avoid stretching the silicone during installation; leaving a 5mm overlap is crucial for a flush join.
Bedding In: You might need to apply extra pressure during the first few cycles to help the new seal “bed in” and activate the microswitch.

Instructional videos

How To Change Vacuum Pump Oil in Aero Vacuum Machines

Key Takeaways:

How To Change Vacuum Pump Oil in Jumbo 42 Machines

Key Takeaways:

How To Change Vacuum Pump Oil in Boxer 52 Machines

Key Takeaways:

How to Change the Exhaust Filter on Your Henkelman Vacuum Sealer

Key Takeaways:

How to Run the Pump Cleaning Cycle on Your Henkelman Vacuum Sealer

Key Takeaways:

How to Replace the Silicone Lid Seal on Your Henkelman Vacuum Sealer

Key Takeaways:

Extracting air, adding value.

Your product

Our possibilities

Your Branches

Our machines